Motor Series
CONTACT Us
- TEL: 0086-532- 66736879
- FAX: 0086-532- 66736879
- E-MAIL: marketing@sdljdj.com
- ADD: No.22,Shanhai Road, Rushan City, Shandong, China
Center Height of Frame: H80~H355mm
Rated Output Power: 0.55kW~315kW
Rated Voltage: 380V,50Hz
(can be customized)
Grade of Protection: IP54、IP55
Class of Insulation: F
Cooling Type: IC06
Share
Outlines
This system is an integrated device which is composed of YVP series variable frequency motor and intelligent variable frequency system. It is a high efficiency and energy-saving product developed by our company for coal-bed gas. It has two types: with encoder and without encoder.
This system has two running modes: frequency conversion and power frequency. If it breaks down under frequency conversion, the system can automatically exchange to work under power frequency to avoid effecting motor running because of frequency conversion system fault. It has protection functions of over-torque, over voltage, over current and lack of phase.
Performance characteristics
1．Mating with speed regulation device, YVP series variable frequency adjustable speed motor constitutes an AC frequency converting step less speed regulation system which is vector controlled. It operates with constant torque frequency converting speed changing in frequency range 1~50Hz and operates with constant power frequency converting speed changing in frequency range 50~100Hz. It runs stably, no torque pulsation phenomenon and has advantages of large starting torque, low starting current.
2．When the YVP series variable frequency adjustable speed motor is assembled with encoder, YVP series variable frequency motor constitutes a loop control to well meet controlling requirement of speed, location, torque. It controls with high accuracy and always guarantees the whole system to be high efficiency and energy saving. At the same time, it can replace general servo control.
Technical Data of YVPM Series
|
Type
|
Power (kW) |
Rated Current (A) |
Rated Torque (N.m) |
Locked Torque Rated Torque |
Min Torque Rated Torque |
Max Torque Rated Torque |
Locked Current Rated Current |
Constant Torque Frequency Converting Scope （Hz） |
Constant Power Frequency Converting Scope （Hz） |
|
|
2poles—Synchronous speed 3000 RPM 50Hz |
||||||||||
|
YVPM80M1-2 |
0.75 |
1.8 |
2.4 |
2.2 |
1.5 |
2.3 |
6.1 |
1~50 |
50~60 |
|
|
YVPM80M2-2 |
1.1 |
2.6 |
3.5 |
7.0 |
||||||
|
YVPM90S-2 |
1.5 |
3.4 |
4.8 |
|||||||
|
YVPM90L-2 |
2.2 |
4.8 |
7.0 |
1.4 |
||||||
|
YVPM100L-2 |
3 |
6.3 |
9.6 |
7.5 |
||||||
|
YVPM112M-2 |
4 |
8.2 |
12.7 |
|||||||
|
YVPM132S1-2 |
5.5 |
11.1 |
17.5 |
2.0 |
1.2 |
|||||
|
YVPM132S2-2 |
7.5 |
14.8 |
23.9 |
|||||||
|
YVPM160M1-2 |
11 |
21.2 |
35.0 |
|||||||
|
YVPM160M2-2 |
15 |
28.6 |
47.8 |
|||||||
|
YVPM160L-2 |
18.5 |
34.7 |
58.9 |
1.1 |
2.2 |
|||||
|
YVPM180M-2 |
22 |
41.0 |
70.0 |
|||||||
|
YVPM200L1-2 |
30 |
55.4 |
95.5 |
|||||||
|
YVPM200L2-2 |
37 |
67.8 |
118 |
|||||||
|
YVPM225M-2 |
45 |
82.1 |
143 |
1.0 |
||||||
|
YVPM250M-2 |
55 |
99.8 |
175 |
1~50 |
||||||
|
YVPM280S-2 |
75 |
135 |
239 |
0.9 |
||||||
|
YVPM280M-2 |
90 |
160 |
287 |
|||||||
|
YVPM315S-2 |
110 |
195 |
350 |
1.8 |
7.1 |
|||||
|
YVPM315M-2 |
132 |
233 |
420 |
|||||||
|
YVPM315L1-2 |
160 |
279 |
509 |
|||||||
|
YVPM315L2-2 |
200 |
348 |
637 |
0.8 |
||||||
|
YVPM355M1-2 |
220 |
382 |
700 |
1.2 |
0.71 |
|||||
|
YVPM355M-2 |
250 |
433 |
796 |
|||||||
|
YVPM355L1-2 |
280 |
484 |
891 |
|||||||
|
YVPM355L-2 |
315 |
545 |
1003 |
|||||||
|
4poles—1500 RPM Synchronous speed 50Hz |
||||||||||
|
YVPM80M1-4 |
0.55 |
1.5 |
3.5 |
2.4 |
1.7 |
2.3 |
5.2 |
1~50 |
50~100 |
|
|
YVPM80M2-4 |
0.75 |
2.0 |
4.8 |
2.3 |
1.6 |
6.0 |
||||
|
YVPM90S-4 |
1.1 |
2.8 |
7.0 |
|||||||
|
YVPM90L-4 |
1.5 |
3.6 |
9.6 |
|||||||
|
YVPM100L1-4 |
2.2 |
5.0 |
14.0 |
2.2 |
1.5 |
7.0 |
||||
|
YVPM100L2-4 |
3 |
6.7 |
19.1 |
|||||||
|
YVPM112M-4 |
4 |
8.8 |
25.5 |
|||||||
|
YVPM132S-4 |
5.5 |
11.7 |
35.0 |
1.4 |
||||||
|
YVPM132M-4 |
7.5 |
15.4 |
47.8 |
|||||||
|
Type
|
Power (kW) |
Rated Current (A) |
Rated Torque (N.m) |
Locked Torque Rated Torque |
Min Torque Rated Torque |
Max Torque Rated Torque |
Locked Current Rated Current |
Constant Torque Frequency Converting Scope （Hz） |
Constant Power Frequency Converting Scope （Hz） |
|
YVPM160M-4 |
11 |
22.5 |
70.0 |
2.2 |
1.4 |
2.3 |
7.0 |
1~50 |
50~100 |
|
YVPM160L-4 |
15 |
30.0 |
95.5 |
7.5 |
|||||
|
YVPM180M-4 |
18.5 |
36.3 |
118 |
2.0 |
1.2 |
2.2 |
|||
|
YVPM180L-4 |
22 |
42.9 |
140 |
||||||
|
YVPM200L-4 |
30 |
57.9 |
191 |
2.0 |
1.2 |
2.2 |
7.2 |
1~50 |
50~100 |
|
YVPM225S-4 |
37 |
70.2 |
236 |
1.9 |
|||||
|
YVPM225M-4 |
45 |
84.9 |
287 |
1.1 |
1~50 |
||||
|
YVPM250M-4 |
55 |
103 |
350 |
2.0 |
|||||
|
YVPM280S-4 |
75 |
140 |
478 |
1.9 |
1.0 |
||||
|
YVPM280M-4 |
90 |
167 |
573 |
||||||
|
YVPM315S-4 |
110 |
201 |
700 |
1.8 |
6.9 |
||||
|
YVPM315M-4 |
132 |
240 |
840 |
||||||
|
YVPM315L1-4 |
160 |
287 |
1019 |
||||||
|
YVPM315L2-4 |
200 |
359 |
1273 |
0.9 |
|||||
|
YVPM355M1-4 |
220 |
390 |
1401 |
1.4 |
0.83 |
||||
|
YVPM355M-4 |
250 |
443 |
1592 |
||||||
|
YVPM355L1-4 |
280 |
496 |
1783 |
0.71 |
|||||
|
YVPM355L-4 |
315 |
558 |
2006 |
||||||
|
6poles—1000 RPM Synchronous speed 50Hz |
|||||||||
|
YVPM90S-6 |
0.75 |
2.3 |
7.2 |
2.0 |
1.5 |
2.2 |
5.5 |
1~50 |
50~100 |
|
YVPM90L-6 |
1.1 |
3.1 |
10.5 |
1.3 |
|||||
|
YVPM100L-6 |
1.5 |
4.0 |
14.3 |
||||||
|
YVPM112M-6 |
2.2 |
5.5 |
21.0 |
6.5 |
|||||
|
YVPM132S-6 |
3 |
7.4 |
28.7 |
||||||
|
YVPM132M1-6 |
4 |
9.7 |
38.2 |
||||||
|
YVPM132M2-6 |
5.5 |
12.9 |
52.5 |
||||||
|
YVPM160M-6 |
7.5 |
17.2 |
71.6 |
||||||
|
YVPM160L-6 |
11 |
24.4 |
105 |
1.2 |
|||||
|
YVPM180L-6 |
15 |
31.6 |
143 |
2.1 |
7.0 |
||||
|
YVPM200L1-6 |
18.5 |
38.5 |
177 |
2.0 |
|||||
|
YVPM200L2-6 |
22 |
44.7 |
210 |
||||||
|
YVPM225M-6 |
30 |
59.3 |
287 |
1.7 |
|||||
|
YVPM250M-6 |
37 |
71.0 |
353 |
1.8 |
|||||
|
YVPM280S-6 |
45 |
85.9 |
430 |
1.1 |
|||||
|
YVPM280M-6 |
55 |
104 |
525 |
||||||
|
YVPM315S-6 |
75 |
141 |
716 |
1.6 |
1.0 |
||||
|
YVPM315M-6 |
90 |
169 |
860 |
||||||
|
Type
|
Power (kW) |
Rated Current (A) |
Rated Torque (N.m) |
Locked Torque Rated Torque |
Min Torque Rated Torque |
Max Torque Rated Torque |
Locked Current Rated Current |
Constant Torque Frequency Converting Scope （Hz） |
Constant Power Frequency Converting Scope （Hz） |
|
YVPM315L1-6 |
110 |
206 |
1051 |
1.6 |
1.0 |
2.0 |
6.7 |
1~50 |
50~100 |
|
YVPM315L2-6 |
132 |
244 |
1261 |
||||||
|
YVPM355M1-6 |
160 |
292 |
1528 |
1.3 |
0.95 |
||||
|
YVPM355M-6 |
185 |
338 |
1767 |
||||||
|
YVPM355M2-6 |
200 |
365 |
1910 |
||||||
|
YVPM355L1-6 |
220 |
402 |
2101 |
||||||
|
YVPM355L-6 |
250 |
456 |
2388 |
0.83 |
|||||
|
YVPM355L2-6 |
280 |
511 |
2674 |
||||||
|
8poles— 750 RPM Synchronous speed 50Hz |
|||||||||
|
YVPM132S-8 |
2.2 |
6.0 |
28.0 |
7.5 |
1.2 |
2.0 |
6.0 |
1~50 |
50~100 |
|
YVPM132M-8 |
3 |
7.9 |
38.2 |
||||||
|
YVPM160M1-8 |
4 |
10.2 |
50.9 |
||||||
|
YVPM160M2-8 |
5.5 |
13.6 |
70.0 |
||||||
|
YVPM160L-8 |
7.5 |
17.7 |
95.5 |
||||||
|
YVPM180L-8 |
11 |
25.1 |
140 |
1.8 |
1.1 |
6.6 |
|||
|
YVPM200L-8 |
15 |
34.0 |
191 |
0.7 |
|||||
|
YVPM225S-8 |
18.5 |
41.0 |
236 |
||||||
|
YVPM225M-8 |
22 |
47.3 |
280 |
1.8 |
|||||
|
YVPM250M-8 |
30 |
63.4 |
382 |
||||||
|
YVPM280S-8 |
37 |
77.7 |
471 |
||||||
|
YVPM280M-8 |
45 |
94.0 |
573 |
1.8 |
1.0 |
2.0 |
6.6 |
1~50 |
|
|
YVPM315S-8 |
55 |
111 |
700 |
1.6 |
1~50 |
||||
|
YVPM315M-8 |
75 |
151 |
955 |
0.9 |
|||||
|
YVPM315L1-8 |
90 |
177 |
1146 |
||||||
|
YVPM315L2-8 |
110 |
216 |
1401 |
6.4 |
|||||
|
YVPM355M1-8 |
132 |
261 |
1618 |
1.3 |
0.83 |
||||
|
YVPM355M2-8 |
160 |
314 |
2037 |
||||||
|
YVPM355L1-8 |
185 |
359 |
2356 |
||||||
|
YVPM355L-8 |
200 |
387 |
2547 |
||||||
|
10poles— 600 RPM Synchronous speed 50Hz |
|||||||||
|
YVPM315S-10 |
45 |
99.6 |
716 |
1.4 |
0.8 |
2.0 |
6.2 |
1~50 |
50~100 |
|
YVPM315M-10 |
55 |
121 |
875 |
1~50 |
|||||
|
YVPM315L1-10 |
75 |
162 |
1194 |
||||||
|
YVPM315L2-10 |
90 |
190 |
1433 |
1.2 |
0.71 |
||||
|
YVPM355M1-10 |
110 |
229 |
1751 |
6.0 |
|||||
|
YVPM355M2-10 |
132 |
275 |
2101 |
||||||
|
YVPM355L-10 |
160 |
333 |
2547 |
||||||
Outline and Mounting Dimensions
|
Frame No. |
Poles
|
Mounting Dimensions |
Outline Dimensions |
||||||||||||||||||||||||||||||||
|
A |
A/2 |
B |
C |
D |
E |
F |
G |
H |
K |
M |
N |
P |
R |
S |
T |
Holes No. of the Flange |
AB |
AC |
AD |
HD |
L |
||||||||||||||
|
80M |
2、4 |
125 |
62.5 |
100 |
50 |
±1.5 |
19 |
+0.009 -0.004 |
40 |
±0.31 |
6 |
0 -0.030 |
15.5 |
0 -0.10 |
80 |
0 -0.5 |
10 |
+0.36 0 |
165 |
130 |
+0.014 -0.011 |
200 |
0 |
±1.5 |
12 |
+0.43 0 |
Ø1.0M |
3.5 |
0 -0.12 |
4 |
165 |
175 |
145 |
175 |
350 |
|
90S |
2、4、6 |
140 |
70 |
56 |
24 |
50 |
8 |
0 -0.036 |
20 |
0 -0.20 |
90 |
180 |
195 |
155 |
195 |
390 |
|||||||||||||||||||
|
90L |
125 |
410 |
|||||||||||||||||||||||||||||||||
|
100L |
160 |
80 |
140 |
63 |
±2.0 |
28 |
60 |
±0.37 |
24 |
100 |
12 |
+0.43 0 |
215 |
180 |
250 |
±2.0 |
14.5 |
Ø1.2M |
4 |
205 |
215 |
180 |
245 |
455 |
|||||||||||
|
112M |
190 |
95 |
70 |
112 |
245 |
240 |
190 |
265 |
480 |
||||||||||||||||||||||||||
|
132S |
2、4、 6、8 |
216 |
108 |
89 |
38 |
+0.018 +0.002 |
80 |
10 |
33 |
132 |
265 |
230 |
+0.016 -0.013 |
300 |
280 |
275 |
210 |
315 |
530 |
||||||||||||||||
|
132M |
178 |
570 |
|||||||||||||||||||||||||||||||||
|
160M |
254 |
127 |
210 |
108 |
±3.0 |
42 |
110 |
±0.43 |
12 |
0 -0.043 |
37 |
160 |
14.5 |
300 |
250 |
350 |
±3.0 |
18.5 |
+0.52 0 |
5 |
330 |
335 |
265 |
385 |
655 |
||||||||||
|
160L |
254 |
700 |
|||||||||||||||||||||||||||||||||
|
180M |
279 |
139.5 |
241 |
121 |
48 |
14 |
42.5 |
180 |
355 |
380 |
285 |
430 |
725 |
||||||||||||||||||||||
|
180L |
279 |
765 |
|||||||||||||||||||||||||||||||||
|
200L |
318 |
159 |
305 |
133 |
55 |
+0.030 +0.011 |
16 |
49 |
200 |
18.5 |
+0.52 0 |
350 |
300 |
±0.016 |
400 |
395 |
420 |
315 |
475 |
850 |
|||||||||||||||
|
225S |
4、8 |
356 |
406 |
286 |
149 |
±4.0 |
60 |
140 |
±0.50 |
18 |
53 |
225 |
400 |
350 |
±0.018 |
450 |
±4.0 |
8 |
435 |
475 |
345 |
530 |
900 |
||||||||||||
|
225M |
2 |
311 |
55 |
110 |
±0.43 |
16 |
49 |
915 |
|||||||||||||||||||||||||||
|
4、6、8 |
60 |
140 |
±0.50 |
18 |
53 |
930 |
|||||||||||||||||||||||||||||
|
250M |
2 |
406 |
203 |
349 |
168 |
±4.0 |
250 |
24 |
500 |
450 |
±0.020 |
550 |
490 |
515 |
385 |
575 |
1015 |
||||||||||||||||||
|
4、6、8 |
65 |
58 |
|||||||||||||||||||||||||||||||||
|
280S |
2 |
457 |
228.5 |
368 |
190 |
280 |
0 -1.0 |
550 |
580 |
410 |
640 |
1130 |
|||||||||||||||||||||||
|
4、6、8 |
75 |
20 |
0 -0.052 |
67.5 |
|||||||||||||||||||||||||||||||
|
280M |
2 |
419 |
65 |
18 |
0 -0.043 |
58 |
1180 |
||||||||||||||||||||||||||||
|
4、6、8 |
75 |
20 |
0 -0.052 |
67.5 |
|||||||||||||||||||||||||||||||
|
315S |
2 |
508 |
254 |
406 |
216 |
65 |
18 |
0 -0.043 |
58 |
315 |
28 |
600 |
550 |
±0.022 |
660 |
24 |
Ø2.0M |
6 |
0 -0.15 |
8 |
635 |
645 |
576 |
865 |
1340 |
||||||||||
|
4、6、8、10 |
80 |
170 |
22 |
0 -0.052 |
71 |
1370 |
|||||||||||||||||||||||||||||
|
315M |
2 |
457 |
65 |
140 |
18 |
0 -0.043 |
58 |
1410 |
|||||||||||||||||||||||||||
|
4、6、8、10 |
80 |
170 |
22 |
0 -0.052 |
71 |
1455 |
|||||||||||||||||||||||||||||
|
315L |
2 |
508 |
65 |
140 |
18 |
0 -0.043 |
58 |
1410 |
|||||||||||||||||||||||||||
|
4、6、8、10 |
80 |
170 |
22 |
0 -0.052 |
71 |
1455 |
|||||||||||||||||||||||||||||
|
355M |
2 |
610 |
305 |
560 |
254 |
±4.0 |
75 |
140 |
20 |
67.5 |
355 |
740 |
680 |
±0.025 |
800 |
740 |
750 |
680 |
1035 |
1640 |
|||||||||||||||
|
4、6、8、10 |
95 |
+0.033 +0.013 |
170 |
25 |
86 |
1670 |
|||||||||||||||||||||||||||||
|
355L |
2 |
630 |
75 |
+0.033 +0.013 |
140 |
20 |
67.5 |
1640 |
|||||||||||||||||||||||||||
|
4、6、8、10 |
95 |
+0.033 +0.013 |
170 |
25 |
86 |
1670 |
|||||||||||||||||||||||||||||
Note: Size R is the distance between the flange fitting surface and the shaft shoulder.
Have any Queries? Let us know. We will clear it for you at the best.
